Model reference
Viking FDWU724 Dishwasher Repair
The Viking FDWU724 is a 24-inch panel-ready built-in dishwasher. The listed product series is 7 Series.
Rating plateDallas
FDWU72424-inch panel-ready built-in dishwasher
- FamilyDishwashers
- Series7 Series
- Codes on file37
FDWU724
Specifications
- Model no.
- FDWU724
- Type
- 24-inch panel-ready built-in dishwasher
- Series
- 7 Series
- Line
- 24-inch Dishwasher with Optional Custom Panel.
- Model
- FDWU724
- Type
- 24-inch panel-ready built-in dishwasher
- Series
- 7 Series
- Overall width
- 23.5625 inches
- Installation
- The front accepts an optional custom panel.
Common faults
- Wash cycle stops before completion
- Display or lights show a fault
- Door does not close normally
- Water left in the tub
About this model
The Viking FDWU724 is a 24-inch panel-ready built-in dishwasher. The listed product series is 7 Series.
Size and equipment reference
| Model | FDWU724 |
|---|---|
| Product name | 24-inch Dishwasher with Optional Custom Panel |
| Overall width | 23.5625 inches |
| Installation | The front accepts an optional custom panel. |
Construction details
The equipment reference details these features.
- Delayed start can postpone operation by up to 24 hours.
- CornerClean moves the axis of the lower wash arm to direct jets into the corners.
- A blue light projects onto the floor while a cycle runs.
- Turbo Fan Dry circulates air for drying.
- OpenAir drying automatically opens the door at the end of a cycle.
- The water circuit uses triple filtration.
- Variable-pressure washing adjusts water volume, pressure and temperature to the load and soil level.
Additional details
- CornerClean uses a moving lower wash-arm axis, while OpenAir opens the door automatically after the cycle for drying.
Further fault descriptions
- 2-2 — Fill error: pressure sensor does not reach target fill pressure during a fill (non-pressure models: insufficient temperature change; VDB200: fill time-out).
- 1-2 — Motor control status error on the variable-speed wash motor (motor control reports a motor operation failure or motor current out of range).
- 2-3 — Low level error: pressure sensor indicates water level below the low-level threshold.
Getting ready for diagnosis
Make a note of water remaining in the tub as part of the symptom description. Consult the owner manual before carrying out accessible cleaning an owner-accessible filter. Keep the internal electrical connections undisturbed until a technician has seen the appliance.
Dallas booking details
For the initial discussion, have the identification label details, along with checks already attempted. The technician investigates the reported problem first; the estimate is presented in writing, and approval is needed before repair work. Send a service request.
Questions about this model
What type of appliance is the Viking FDWU724?
It is a 24-inch panel-ready built-in dishwasher in the 7 Series line.
What is the overall width of the Viking FDWU724?
Overall width: 23.5625 inches. Mention it together with the serial number when you request a visit.
How can I prepare for an appliance assessment?
Explain regular dishwasher door closure without assuming a failed component. Include in your request whether trouble appears during washing or draining. Leave all enclosed wiring connections undisturbed until a service technician has seen the appliance.
24-inch panel-ready built-in dishwasher error codes
1-1Dishwasher1-1 is described as “moisture sensor disconnect”.1-2Dishwasher1-2 is described as “motor control status error on the variable-speed wash motor”.1-3Dishwasher1-3 is described as “motor control communication error”.1-4Dishwasher1-4 is described as “diverter timeout”.1-5Dishwasher1-5 is described as “drain error”.2-1Dishwasher2-1 is described as “pressure sensor disconnect”.
Other models
Work order
Book a Viking technician
Read the model and serial number off the rating plate and add them to the request — the technician checks parts for that exact unit before the visit.
- Phone(415) 853-4850
- Emailservice
@vikingdallas .com - HoursMon–Sat 8:00 AM – 7:00 PM
- Service area11 counties across Dallas–Fort Worth
Request a Viking repair
Ready to get your Viking appliance working again?
Diagnosis first, a written estimate before any work, parts matched to the full model number.