Viking Dishwasher error code
Viking Dishwasher 2-3 Error Code
What 2-3 means on a Viking dishwasher, the checks that are safe to make and when it needs a technician.
2-3
What it means
2-3 is described as “low level error”.
2-3: low level error.
Safe for owners
Check first
Switch the appliance off at the breaker for one minute, restore power and note whether the code returns. Nothing else should be opened or removed.
Likely cause
On most Viking appliances, 2-3 points to a control, sensor, ignition, heating, door-lock, water or drain issue that should be confirmed against the full model number before parts are replaced.
When to book
If the code comes back after the power reset, or there is water, a burning smell or a tripped breaker, stop using the appliance and book a visit with the full model number.
About 2-3
On a Viking dishwasher, the 2-3 indication has this documented meaning: “low level error”.
| Code | 2-3 |
|---|---|
| Applies to | Electronic-control built-in dishwashers; displayed as flashes of POTS/PANS light (first digit) then NORMAL WASH light (second digit). Documented for: FDB451/VDB451 (SMK-0005, 2012); VDB325/VDB450 from 5/2010 and 325E/450E (SMK-0003, 2011) |
| Meaning | Low level error: pressure sensor indicates water level below the low-level threshold. |
| Control generation | Legacy |
What can trigger the signal
The matching manual describes the listed fault conditions.
- Low water level in the sump; check that items are secured in the rack.
Work for a technician
The technical manual gives the service notes below.
- Verify that the drain has the proper high loop.
Other codes in the appliance documentation
- 2-2 — Fill error: pressure sensor does not reach target fill pressure during a fill (non-pressure models: insufficient temperature change; VDB200: fill time-out).
- 1-4 — Diverter timeout: main control activates the diverter but gets no feedback that the correct position was reached.
- 2-4 — High level error: pressure sensor indicates water level above the high-level threshold.
Notes to prepare at home
Describe water remaining in the tub in the repair request. Consult the owner manual before carrying out accessible cleaning an owner-accessible filter. Leave the concealed appliance wiring untouched while checking external controls.
Dallas service and preparation
When requesting service, provide the unit model and any fault message and describe any changes in normal use. The cause is assessed before work is proposed; a written repair estimate describes the proposal, and the repair proceeds only after your approval. Contact the service team.
Sources
- Viking Preferred Service Service Manual Built-In Dishwasher FDB451 VDB451, SMK-0005, Aug 2012 (Fail Codes, pp.12-13), hosted on uncleharrywizard.com
- Viking Preferred Service Service Manual Built-In Dishwasher VDB325 VDB450 (from 5/26/2010) VDB325E VDB450E, SMK-0003, Apr 2011 (Error Codes, pp.19-21), hosted on uncleharrywizard.com
Questions about this code
What does 2-3 mean on a Viking dishwasher?
The manual describes the indication as “low level error”. Match the model and control version before following the instructions.
What should I do before requesting dishwasher service?
Describe any obstruction around the door as part of the reported problem description. Explain if the equipment stops during the chosen cycle. Leave the unit service panels untouched while checking external controls.
Dishwasher models on file
- DFUD04224-inch built-in dishwasherDesigner Series Undercounter Dishwasher.
- FDWU52424-inch panel-ready built-in dishwasher24-inch Dishwasher with Optional Custom Panel.
- FDWU524WS24-inch panel-ready built-in dishwasher with water softener24-inch Dishwasher with Water Softener and Optional Custom Panel.
- FDWU72424-inch panel-ready built-in dishwasher24-inch Dishwasher with Optional Custom Panel.
Work order
Book a Viking technician
Read the model and serial number off the rating plate and add them to the request — the technician checks parts for that exact unit before the visit.
- Phone(415) 853-4850
- Emailservice
@vikingdallas .com - HoursMon–Sat 8:00 AM – 7:00 PM
- Service area11 counties across Dallas–Fort Worth
Request a Viking repair
Ready to get your Viking appliance working again?
Diagnosis first, a written estimate before any work, parts matched to the full model number.