Viking Dishwasher error code
Viking Dishwasher 2-5 Error Code
What 2-5 means on a Viking dishwasher, the checks that are safe to make and when it needs a technician.
2-5
What it means
2-5 is described as “level/siphon error”.
2-5: level/siphon error.
Safe for owners
Check first
Switch the appliance off at the breaker for one minute, restore power and note whether the code returns. Nothing else should be opened or removed.
Likely cause
On most Viking appliances, 2-5 points to a control, sensor, ignition, heating, door-lock, water or drain issue that should be confirmed against the full model number before parts are replaced.
When to book
If the code comes back after the power reset, or there is water, a burning smell or a tripped breaker, stop using the appliance and book a visit with the full model number.
About 2-5
Viking describes code 2-5 on this dishwasher with the wording “level/siphon error”.
| Code | 2-5 |
|---|---|
| Meaning | Level/siphon error: abnormal pressure-sensor change (drains too fast or fills too fast). |
| Control generation | Legacy |
| Applies to | Electronic-control built-in dishwashers; displayed as flashes of POTS/PANS light (first digit) then NORMAL WASH light (second digit). Documented for: FDB451/VDB451 (SMK-0005, 2012); VDB325/VDB450 from 5/2010 and 325E/450E (SMK-0003, 2011) |
Scope of the fault guidance
The manual identifies the listed equipment.
- The 325/450 table names this code Level Sensor Error.
Service procedures
The technical manual lists these internal checks.
- Verify that the drain line has the proper high loop.
- Make sure the unit is level front to back and side to side.
- Drain connection should be at least 20 inches from the floor; lower can cause siphoning during the cycle.
Check a different display code
Notes to prepare at home
Make a note of any obstruction around the door as part of the symptom description. Note whether the chosen wash cycle finishes. Leave the appliance service panels untouched while checking external controls.
Repair appointments in Dallas
For the service professional, collect the appliance identification details, plus the original display wording. A diagnosis guides the repair discussion; a written estimate describes the proposal, with repair work subject to your authorization. Book an assessment.
Sources
- Viking Preferred Service Service Manual Built-In Dishwasher FDB451 VDB451, SMK-0005, Aug 2012 (Fail Codes, pp.12-13), hosted on uncleharrywizard.com
- Viking Preferred Service Service Manual Built-In Dishwasher VDB325 VDB450 (from 5/26/2010) VDB325E VDB450E, SMK-0003, Apr 2011 (Error Codes, pp.19-21), hosted on uncleharrywizard.com
Questions about this code
What does 2-5 mean on a Viking dishwasher?
The manual describes the indication as “level/siphon error”. Match the model and control version before following the instructions.
What should I do before requesting dishwasher service?
Tell the appliance technician about any obstruction around the door as part of the symptom description. Identify when the wash or drain behavior changes. Keep all internal wiring connections untouched while checking external controls.
Dishwasher models on file
- DFUD04224-inch built-in dishwasherDesigner Series Undercounter Dishwasher.
- FDWU52424-inch panel-ready built-in dishwasher24-inch Dishwasher with Optional Custom Panel.
- FDWU524WS24-inch panel-ready built-in dishwasher with water softener24-inch Dishwasher with Water Softener and Optional Custom Panel.
- FDWU72424-inch panel-ready built-in dishwasher24-inch Dishwasher with Optional Custom Panel.
Work order
Book a Viking technician
Read the model and serial number off the rating plate and add them to the request — the technician checks parts for that exact unit before the visit.
- Phone(415) 853-4850
- Emailservice
@vikingdallas .com - HoursMon–Sat 8:00 AM – 7:00 PM
- Service area11 counties across Dallas–Fort Worth
Request a Viking repair
Ready to get your Viking appliance working again?
Diagnosis first, a written estimate before any work, parts matched to the full model number.