Model reference
Viking VDB325 Dishwasher Repair
The Viking VDB325 is a 24-inch built-in dishwasher. The series is identified as Professional 325.
Rating plateDallas
VDB32524-inch built-in dishwasher
- FamilyDishwashers
- SeriesProfessional 325
- Codes on file37
VDB325
Specifications
- Model no.
- VDB325
- Type
- 24-inch built-in dishwasher
- Series
- Professional 325
- Line
- Built-In Dishwasher VDB325.
- Model
- VDB325
- Type
- 24-inch built-in dishwasher
- Series
- Professional 325
- Overall width
- 23-7/8 inches
- Dimensions
- Height adjusts from 33-7/8 to 35 inches.
- Power
- Requires 120 V AC, 60 Hz, 15 A.
- Power
- Non-E model uses a 1,400 W water heater.
- Inlet water pressure range
- 10–125 psi
Common faults
- Wash cycle stops before completion
- Door does not close normally
- Unusual noise during washing
- Dishes remain wet after drying
- Dishes remain soiled
- Water left in the tub
About this model
The Viking VDB325 is a 24-inch built-in dishwasher. The series is identified as Professional 325.
Physical and installation details
| Power | Requires 120 V AC, 60 Hz, 15 A. |
|---|---|
| Overall width | 23-7/8 inches |
| Minimum cutout depth | 24 inches |
| Inlet water pressure range | 10–125 psi |
| Product name | Built-In Dishwasher VDB325 |
| Power | Non-E model uses a 1,400 W water heater. |
| Dimensions | Height adjusts from 33-7/8 to 35 inches. |
| Model | VDB325 |
Care and finish information
The appliance reference lists the maintenance guidance below.
- Identification plate is on the left side of the door opening.
Design and operation
The manufacturer description gives these product details.
- Non-E 325 uses a 1,400 W heater; early control version offers a 155°F final rinse.
- Pre-November 10, 2010 models allow a delay of up to six hours.
- Pre-November 10, 2010 models offer a 155°F final rinse on Pots/Pans and Normal Wash.
Other messages and alarms
- 2-3 — Low level error: pressure sensor indicates water level below the low-level threshold.
- 2-2 — Fill error: pressure sensor does not reach target fill pressure during a fill (non-pressure models: insufficient temperature change; VDB200: fill time-out).
- 1-1 — Moisture sensor disconnect: moisture sensor reads out of normal range (wires disconnected, defective sensor or control board).
Preparing for an appliance assessment
Document normal dishwasher door closure before deciding on repair work. Note whether the chosen wash cycle finishes. Keep any enclosed electrical connections untouched during owner observations.
Preparing for a Dallas visit
When requesting service, provide the identification label details and explain which owner checks were attempted. Diagnosis comes first; a written estimate follows with no repairs started without approval. Contact the service team.
Questions about this model
What type of appliance is the Viking VDB325?
It is a 24-inch built-in dishwasher in the Professional 325 line.
What is the overall width of the Viking VDB325?
Overall width: 23-7/8 inches. Keep it with the model and serial numbers from the rating label when you book.
How can I prepare for an appliance assessment?
Report usual dishwasher door closure in the repair request. Report if the appliance stops during the selected cycle. Leave the electrical service covers undisturbed until a service technician has seen the appliance.
24-inch built-in dishwasher error codes
1-1Dishwasher1-1 is described as “moisture sensor disconnect”.1-2Dishwasher1-2 is described as “motor control status error on the variable-speed wash motor”.1-3Dishwasher1-3 is described as “motor control communication error”.1-4Dishwasher1-4 is described as “diverter timeout”.1-5Dishwasher1-5 is described as “drain error”.2-1Dishwasher2-1 is described as “pressure sensor disconnect”.
Other models
- VDB325E24-inch built-in dishwasher24-inch Professional Built-In Dishwasher.
- VDB45024-inch built-in dishwasher24-inch Professional Built-In Dishwasher.
- VDB450E24-inch built-in dishwasher24-inch Professional Dishwasher.
- VDWU32424-inch stainless steel built-in dishwasher24-inch Dishwasher with Installed Professional Stainless Steel Panel.
Work order
Book a Viking technician
Read the model and serial number off the rating plate and add them to the request — the technician checks parts for that exact unit before the visit.
- Phone(415) 853-4850
- Emailservice
@vikingdallas .com - HoursMon–Sat 8:00 AM – 7:00 PM
- Service area11 counties across Dallas–Fort Worth
Request a Viking repair
Ready to get your Viking appliance working again?
Diagnosis first, a written estimate before any work, parts matched to the full model number.