Skip to content

Viking Range error code

Viking Range F07 Error Code

What F07 means on a Viking range, the checks that are safe to make and when it needs a technician.

Display readoutDallas

F07Range display code

01

F07

What it means

F07 is described as “door switch fault”.

F07: door switch fault.

02

Safe for owners

Check first

Switch the appliance off at the breaker for one minute, restore power and note whether the code returns. Nothing else should be opened or removed.

03

Likely cause

On most Viking appliances, F07 points to a control, sensor, ignition, heating, door-lock, water or drain issue that should be confirmed against the full model number before parts are replaced.

04

When to book

If the code comes back after the power reset, or there is water, a burning smell or a tripped breaker, stop using the appliance and book a visit with the full model number.

05

About F07

On a Viking range, the F07 indication has this documented meaning: “door switch fault”.

CodeF07
MeaningDoor switch: door open during CLEAN (latch or door sensor failed, or door opened right after selecting CLEAN). Range: Clean on, Cycle flashes 7.
Applies toRanges and wall ovens with EOC4 control; wall ovens with TOD2/TOD3 clock show the F code, ranges show it as Cycle/Clean light flashes
06

Internal fault investigation

The service guidance identifies these diagnostic checks.

  • Turn cycle off, power down and correct the door lock issue.
07

Other signals to look up

  • F02 — RTD (oven temperature sensor) open or short. Cancels cook and clean cycles; control inoperable. Range: Cycle light flashes once, Clean light off.
  • F03 — Cooling fan Hall-effect: control not receiving a square wave in the allowed frequency range. Cancels bake or clean. Range: Clean on, Cycle flashes 3.
  • F06 — Invalid model header: model header undefined, read at power-up; control inoperable. Range: Clean on, Cycle flashes 2.
08

Preparing for an appliance assessment

Write down the exact cooking-control message as part of the symptom description. Include any change in the usual heating sequence. Leave the enclosed control circuits untouched during owner observations.

09

Dallas booking details

For the service professional, collect the appliance identification details and mention whether the operating concern returns. A diagnosis guides the repair discussion; the findings lead to a written repair estimate, and you approve repairs before the work starts. Send a service request.

10

Sources

11

Questions about this code

What does F07 mean on a Viking range?

The manual describes the indication as “door switch fault”. Match the model and control version before following the instructions.

What should I do before requesting range service?

Give details of the chosen heating mode with the model identification. Tell the service professional about the setting in use when trouble began. Keep all concealed wiring connections untouched during owner-accessible care.

13

Range models on file

All models

14

Work order

Book a Viking technician

Read the model and serial number off the rating plate and add them to the request — the technician checks parts for that exact unit before the visit.

Request a Viking repair

Ready to get your Viking appliance working again?

Diagnosis first, a written estimate before any work, parts matched to the full model number.

(415) 853-4850 Book a Repair