Viking Range error code
Viking Range F06 Error Code
What F06 means on a Viking range, the checks that are safe to make and when it needs a technician.
F06
What it means
F06 is described as “invalid model header”.
F06: invalid model header.
Safe for owners
Check first
Switch the appliance off at the breaker for one minute, restore power and note whether the code returns. Nothing else should be opened or removed.
Likely cause
On most Viking appliances, F06 points to a control, sensor, ignition, heating, door-lock, water or drain issue that should be confirmed against the full model number before parts are replaced.
When to book
If the code comes back after the power reset, or there is water, a burning smell or a tripped breaker, stop using the appliance and book a visit with the full model number.
About F06
The F06 indication on a Viking range is described in the manual as “invalid model header”.
| Code | F06 |
|---|---|
| Meaning | Invalid model header: model header undefined, read at power-up; control inoperable. Range: Clean on, Cycle flashes 2. |
| Applies to | Ranges and wall ovens with EOC4 control; wall ovens with TOD2/TOD3 clock show the F code, ranges show it as Cycle/Clean light flashes |
Visible signs and operating behavior
The documentation provides this operating behavior.
- Model header is read only at power-up.
Technical fault guidance
The service documentation describes these technical checks.
- Power down and insert the correct model header.
Additional fault references
- F10 — Improper self-clean selection: a delayed self-clean cycle was attempted. Range: Clean on, Cycle flashes 10.
- F04 — Meat probe input shorted. Cancels cook-by-probe operation (priority B, non-critical).
- F08 — Communication error: RS485 serial link lost between EOC4 and user interface. Range: Clean on, Cycle flashes 8.
What to check without opening panels
Explain which oven or zone changes before the diagnostic assessment. Include in your request the setting in use when trouble began. Leave the appliance service panels alone when preparing for inspection.
Getting repair help in Dallas
Have ready the full model number and displayed message, plus the original display wording. Repair decisions follow diagnosis; the repair proposal includes a written repair estimate with no repairs started without approval. Request appliance service.
Sources
Questions about this code
What does F06 mean on a Viking range?
The manual describes the indication as “invalid model header”. Match the model and control version before following the instructions.
What should I do before requesting range service?
Tell the repair technician about the selected heating mode with the model identification. Report the setting in use when trouble began. Keep the internal electrical components intact for the service professional.
Range models on file
- RVER330130-inch freestanding radiant electric range with convection oven30-inch Self-Cleaning Electric Range.
- RVIR33030-inch freestanding induction range with self-cleaning electric oven30-inch Induction Range.
- TVDR36136-inch dual-fuel range with four gas burners and electric oven36-inch Tuscany Dual Fuel Range.
- TVDR48148-inch dual-fuel double-oven range48-inch Tuscany Dual Fuel Range.
Work order
Book a Viking technician
Read the model and serial number off the rating plate and add them to the request — the technician checks parts for that exact unit before the visit.
- Phone(415) 853-4850
- Emailservice
@vikingdallas .com - HoursMon–Sat 8:00 AM – 7:00 PM
- Service area11 counties across Dallas–Fort Worth
Request a Viking repair
Ready to get your Viking appliance working again?
Diagnosis first, a written estimate before any work, parts matched to the full model number.