Model reference
Viking VRT736 Rangetop Repair
Viking identifies VRT736 as a 36-inch built-in sealed-burner gas rangetop. The listed product series is 7 Series. It was also sold as VRT7364GSSLP, VRT7366BSS, VRT7366BSSLP.
Rating plateDallas
VRT73636-inch built-in sealed-burner gas rangetop
- FamilyCooktops & Rangetops
- Series7 Series
- Codes on file7
VRT736
Specifications
- Model no.
- VRT736
- Type
- 36-inch built-in sealed-burner gas rangetop
- Series
- 7 Series
- Line
- 36-inch Gas Rangetop.
- Model
- VRT736
- Type
- 36-inch built-in sealed-burner gas rangetop
- Series
- 7 Series
- Overall width
- 35.875 inches
- Front Elevation burners
- 23,000 BTU each
Common faults
- Burner or cooking zone does not heat
- Heating differs from the selected setting
- Display shows a fault message
- Controls do not respond normally
About this model
Viking identifies VRT736 as a 36-inch built-in sealed-burner gas rangetop. The listed product series is 7 Series. It was also sold as VRT7364GSSLP, VRT7366BSS, VRT7366BSSLP.
Size, capacity and installation
| Product name | 36-inch Gas Rangetop |
|---|---|
| Model | VRT736 |
| Front Elevation burners | 23,000 BTU each |
| Nominal size | 36″ |
| Overall width | 35.875 inches |
Equipment and operating features
The appliance specifications detail these features.
- The 6B configuration has six sealed gas burners.
- The six-burner configuration combines 23,000-BTU front Elevation burners, VariSimmer on every burner, and CoolLit knob backlighting.
- All burners include a VariSimmer setting.
- BlackChrome knobs have CoolLit LED backlighting.
- Continuous cast iron grates support sliding cookware between burners.
- SureSpark provides automatic ignition and reignition.
Care information
The manual includes these maintenance details.
- Grates, burner caps, and knobs are removable for sink cleaning.
Additional fault references
- 2 FLASHES — Induction LED flash code: 2 consecutive flashes = internal power device malfunction.
- Er47 — LEDs flash 5 times then pause and 7-digit display shows Er47: wrong configuration program (C1-C6) in the interface adapter board.
- 6 FLASHES — Induction LED flash code: 6 consecutive flashes = incompatible cookware for induction.
What to check without opening panels
Write down the selected heating mode when discussing the appliance concern. Keep the selected mode with your symptom notes. Leave the hidden electrical components untouched during owner observations.
Discussing repairs in Dallas
Have ready the unit model and any fault message and mention whether the operating concern returns. Assessment precedes decisions about the repair; the findings lead to a written repair estimate, so no repair begins before you authorize it. Arrange diagnosis.
Questions about this model
What type of appliance is the Viking VRT736?
It is a 36-inch built-in sealed-burner gas rangetop in the 7 Series line.
What is the overall width of the Viking VRT736?
Overall width: 35.875 inches. Keep it with the model and serial numbers from the rating label when you book.
How can I prepare for an appliance assessment?
Give details of the chosen heating mode with the model identification. Describe whether the concern appears during heating or standby. Leave any enclosed electrical connections undisturbed until a technician has seen the unit.
36-inch built-in sealed-burner gas rangetop error codes
1 FLASHInduction cooktop1 FLASH is described as “internal power device over temperature”.2 FLASHESInduction cooktop2 FLASHES is described as “internal power device malfunction”.3 FLASHESInduction cooktop3 FLASHES is described as “power device temperature sensor malfunction”.4 FLASHESInduction cooktop4 FLASHES is described as “coil temperature sensor malfunction”.5 FLASHESInduction cooktop5 FLASHES is described as “inside ambient temperature too high”.6 FLASHESInduction cooktop6 FLASHES is described as “incompatible cookware for induction”.
Other models
Work order
Book a Viking technician
Read the model and serial number off the rating plate and add them to the request — the technician checks parts for that exact unit before the visit.
- Phone(415) 853-4850
- Emailservice
@vikingdallas .com - HoursMon–Sat 8:00 AM – 7:00 PM
- Service area11 counties across Dallas–Fort Worth
Request a Viking repair
Ready to get your Viking appliance working again?
Diagnosis first, a written estimate before any work, parts matched to the full model number.