Model reference
Viking MVIC6301 Cooktop Repair
Viking identifies MVIC6301 as a 30-inch built-in four-zone induction cooktop. The series is identified as RVL. It was also sold as MVIC6304BBG.
Rating plateDallas
MVIC630130-inch built-in four-zone induction cooktop
MVIC6301
Specifications
- Model no.
- MVIC6301
- Type
- 30-inch built-in four-zone induction cooktop
- Series
- RVL
- Line
- 30-inch Induction Cooktop.
- Model
- MVIC6301
- Type
- 30-inch built-in four-zone induction cooktop
- Series
- RVL
- Dimensions
- The top measures 21 inches deep and 2.25 inches high.
- Power
- Power management supplies a boost on all elements.
- Cooking surface
- black glass
- Power
- The 30-inch model includes one 9-inch 3,700-watt element.
Common faults
- Heating differs from the selected setting
- Controls do not respond normally
- Cooking zone stops during use
- Display shows a fault message
- Unexpected clicking or operating noise
About this model
Viking identifies MVIC6301 as a 30-inch built-in four-zone induction cooktop. The series is identified as RVL. It was also sold as MVIC6304BBG.
Measurements and requirements
| Power | The 30-inch model includes one 9-inch 3,700-watt element. |
|---|---|
| Product name | 30-inch Induction Cooktop |
| Cooking surface | black glass |
| Dimensions | The top measures 21 inches deep and 2.25 inches high. |
| Model | MVIC6301 |
| Power | Power management supplies a boost on all elements. |
Equipment and operating features
The specification sheet lists these product details.
- Timers support a cooking-element function and a standalone function.
- Touch controls display settings digitally.
- There are four MagneQuick induction cooking zones.
- The four-zone RVL cooktop combines digital touch controls, two timer functions, and a 9-inch 3,700-watt element.
- A simmer setting supports melting and keeping food warm.
- A sensor switches a zone off when cookware is not detected.
- Indicator lights identify hot surfaces and active elements.
Additional fault references
- 3 FLASHES — Induction LED flash code: 3 consecutive flashes = power device temperature sensor malfunction.
- 2 FLASHES — Induction LED flash code: 2 consecutive flashes = internal power device malfunction.
- 5 FLASHES — Induction LED flash code: 5 consecutive flashes = inside ambient temperature too high.
Getting ready for diagnosis
Make a note of a returning cooktop display message without assuming a failed component. Note whether the message shown on the controls returns. Leave the hidden electrical components untouched while checking external controls.
Dallas service and preparation
When requesting service, provide the full model number and display indication and describe any differences in normal use. The technician investigates the operating concern first; you receive a written repair estimate, and the repair proceeds only after your approval. Request appliance service.
Questions about this model
What type of appliance is the Viking MVIC6301?
It is a 30-inch built-in four-zone induction cooktop in the RVL line.
Which details should I have ready for this model?
Copy the model and serial numbers from the rating label and note any code on the display.
How can I prepare for an appliance assessment?
Record where the heating concern occurs in the repair request. Tell the appliance technician about the setting in use when trouble began. Leave the concealed electrical components untouched during owner observations.
30-inch built-in four-zone induction cooktop error codes
1 FLASHInduction cooktop1 FLASH is described as “internal power device over temperature”.2 FLASHESInduction cooktop2 FLASHES is described as “internal power device malfunction”.3 FLASHESInduction cooktop3 FLASHES is described as “power device temperature sensor malfunction”.4 FLASHESInduction cooktop4 FLASHES is described as “coil temperature sensor malfunction”.5 FLASHESInduction cooktop5 FLASHES is described as “inside ambient temperature too high”.6 FLASHESInduction cooktop6 FLASHES is described as “incompatible cookware for induction”.
Other models
Work order
Book a Viking technician
Read the model and serial number off the rating plate and add them to the request — the technician checks parts for that exact unit before the visit.
- Phone(415) 853-4850
- Emailservice
@vikingdallas .com - HoursMon–Sat 8:00 AM – 7:00 PM
- Service area11 counties across Dallas–Fort Worth
Request a Viking repair
Ready to get your Viking appliance working again?
Diagnosis first, a written estimate before any work, parts matched to the full model number.