Viking Refrigerator error code
Viking Refrigerator SH Error Code
What SH means on a Viking refrigerator, the checks that are safe to make and when it needs a technician.
SH
What it means
SH is described as “shorted thermistor during service testing”.
SH: shorted thermistor during service testing.
Safe for owners
Check first
Switch the appliance off at the breaker for one minute, restore power and note whether the code returns. Nothing else should be opened or removed.
Likely cause
On most Viking appliances, SH points to a control, sensor, ignition, heating, door-lock, water or drain issue that should be confirmed against the full model number before parts are replaced.
When to book
If the code comes back after the power reset, or there is water, a burning smell or a tripped breaker, stop using the appliance and book a visit with the full model number.
About SH
On a Viking refrigerator, the SH indication has this documented meaning: “shorted thermistor during service testing”.
| Applies to | VCFF / DDFF136D freestanding French door refrigerator, service test mode only |
|---|---|
| Meaning | Service test display (VCFF/DDFF136D): thermistor reading shows SH = shorted thermistor (fresh food, freezer, ambient or ice box thermistor tests 141/142/144/145). |
| Code | SH |
Internal fault investigation
The service notes set out these internal checks.
- Enter service test mode: hold WATER, hold UR, release WATER, wait 3 seconds; display shows SE, press UR again to reach test 101.
- Ice box thermistor test 145 checks the ice maker box thermistor and shows actual temperature, OP or SH.
More code guidance
- oPn — Temperature sensor alarm: display shows oPn (sensor problem) with audible alarm.
- OP — Service test display (VCFF/DDFF136D): thermistor reading shows OP = open thermistor (fresh food, freezer, ambient or ice box thermistor tests 141/142/144/145).
- LONG TERM POWER LOSS — After a long power loss the display shows a power-loss indication.
Notes to prepare at home
Note whether cooling also changes with the model identification. Consult the model-specific owner guidance for filter care. Leave the enclosed control circuits alone before the diagnostic visit.
Dallas booking details
At booking, provide the complete serial and model identification and describe the sequence of events. Diagnosis comes first; you receive a written repair estimate with no repairs started without approval. Contact the service team.
Sources
Questions about this code
What does SH mean on a Viking refrigerator?
The manual describes the indication as “shorted thermistor during service testing”. Match the model and control version before following the instructions.
What should I do before requesting refrigerator service?
Tell the repair technician about a door-related alarm before the diagnostic assessment. Tell the service technician about whether the alarm stops when the door closes. Keep the enclosed electrical components untouched during accessible care.
Refrigerator models on file
- FBI7360W36-inch integrated panel-ready bottom-freezer refrigerator7 Series Integrated 36-inch Bottom-Freezer.
- FBI7360WR36-inch integrated panel-ready bottom-freezer refrigerator7 Series Integrated 36-inch Bottom-Freezer.
- FBUI5242D24-inch panel-ready solid-door undercounter beverage center24-inch Panel Ready Solid Door Beverage Center.
- FDBB536436-inch built-in panel-ready bottom-freezer refrigerator36-inch Built-in Bottom-Freezer.
Work order
Book a Viking technician
Read the model and serial number off the rating plate and add them to the request — the technician checks parts for that exact unit before the visit.
- Phone(415) 853-4850
- Emailservice
@vikingdallas .com - HoursMon–Sat 8:00 AM – 7:00 PM
- Service area11 counties across Dallas–Fort Worth
Request a Viking repair
Ready to get your Viking appliance working again?
Diagnosis first, a written estimate before any work, parts matched to the full model number.