Skip to content

Viking Refrigerator error code

Viking Refrigerator BLUEZONE Error Code

What BLUEZONE means on a Viking refrigerator, the checks that are safe to make and when it needs a technician.

Display readoutDallas

BLUEZONERefrigerator display code

01

BLUEZONE

What it means

BLUEZONE is described as “Bluezone bulb replacement reminder”.

BLUEZONE: Bluezone bulb replacement reminder.

02

Safe for owners

Check first

Switch the appliance off at the breaker for one minute, restore power and note whether the code returns. Nothing else should be opened or removed.

03

Likely cause

On most Viking appliances, BLUEZONE points to a control, sensor, ignition, heating, door-lock, water or drain issue that should be confirmed against the full model number before parts are replaced.

04

When to book

If the code comes back after the power reset, or there is water, a burning smell or a tripped breaker, stop using the appliance and book a visit with the full model number.

05

About BLUEZONE

Viking describes code BLUEZONE on this refrigerator with the wording “Bluezone bulb replacement reminder”.

CodeBLUEZONE
MeaningBluezone indicator strip shows on display: Bluezone bulb needs replacement (about every two years).
Applies to7 Series built-in bottom-freezer (FBI7360/VBI7360)
06

Owner troubleshooting

The care instructions set out these owner steps.

  1. Replace the Bluezone bulb kit, then hold the Refrigerator selector button 3 seconds to clear.
07

Work for a technician

The service guidance describes these diagnostic checks.

  • A Bluezone replacement bulb kit (P/N RBZB7) is bought from Viking Range; the Bluezone only works while the refrigerator is running.
08

Other messages and alarms

  • WATER FILTER — FILTER button illuminates blue: time to change the water filter.
  • HIGH TEMPERATURE ALARM — Alarm sounds and display flashes when temperature exceeds the allowed high temperature.
  • OPEN DOOR ALARM — Alarm sounds when a door or drawer stays open longer than 3 minutes.
09

Safe checks and useful observations

Tell the technician about a door-related alarm when arranging a visit. Make a note of whether a door alarm is also active. Keep the appliance service panels untouched while checking external controls.

10

Getting repair help in Dallas

For the visit, prepare the appliance model information as printed on the identification label and describe any changes during operation. Assessment precedes decisions about the repair; you receive a written repair estimate, with repair work subject to your authorization. Arrange diagnosis.

11

Sources

12

Questions about this code

What does BLUEZONE mean on a Viking refrigerator?

The manual describes the indication as “Bluezone bulb replacement reminder”. Match the model and control version before following the instructions.

What should I do before requesting refrigerator service?

Write down a door-related alarm as part of the reported problem description. Write down whether a door alarm is also active. Leave the internal electrical components untouched during readily accessible care.

14

Refrigerator models on file

All models

15

Work order

Book a Viking technician

Read the model and serial number off the rating plate and add them to the request — the technician checks parts for that exact unit before the visit.

Request a Viking repair

Ready to get your Viking appliance working again?

Diagnosis first, a written estimate before any work, parts matched to the full model number.

(415) 853-4850 Book a Repair