Skip to content

Viking Refrigerator error code

Viking Refrigerator OP Error Code

What OP means on a Viking refrigerator, the checks that are safe to make and when it needs a technician.

Display readoutDallas

OPRefrigerator display code

01

OP

What it means

OP is described as “open thermistor during service testing”.

OP: open thermistor during service testing.

02

Safe for owners

Check first

Switch the appliance off at the breaker for one minute, restore power and note whether the code returns. Nothing else should be opened or removed.

03

Likely cause

On most Viking appliances, OP points to a control, sensor, ignition, heating, door-lock, water or drain issue that should be confirmed against the full model number before parts are replaced.

04

When to book

If the code comes back after the power reset, or there is water, a burning smell or a tripped breaker, stop using the appliance and book a visit with the full model number.

05

About OP

The OP indication on a Viking refrigerator is described in the manual as “open thermistor during service testing”.

Applies toVCFF / DDFF136D freestanding French door refrigerator, service test mode only
CodeOP
MeaningService test display (VCFF/DDFF136D): thermistor reading shows OP = open thermistor (fresh food, freezer, ambient or ice box thermistor tests 141/142/144/145).
06

Work for a technician

The repair instructions set out these technical checks.

  • Enter service test mode: hold WATER, hold UR, release WATER, wait 3 seconds; display shows SE, press UR again to reach test 101.
  • Thermistor tests: 141 fresh food, 142 freezer, 144 ambient, 145 ice box; each shows actual temperature, OP or SH.
07

Observable fault details

The appliance reference sets out this operating behavior.

  • In door-state tests 151/152 the display reads OP (open) when a door is open and CL (closed) when both doors are closed.
08

More code guidance

  • OPEN DOOR ALARM — Alarm sounds when a door or drawer stays open longer than 3 minutes.
  • oPn — Temperature sensor alarm: display shows oPn (sensor problem) with audible alarm.
  • LONG TERM POWER LOSS — After a long power loss the display shows a power-loss indication.
09

What to check without opening panels

Record where interior moisture appears with the model identification. Make a note of whether condensation appears near the door. Keep all internal wiring connections untouched during owner observations.

10

Discussing repairs in Dallas

For the service technician, collect the model designation and observed behavior, along with checks already attempted. The symptom is investigated before repairs; the repair proposal includes a written repair estimate, with repair work subject to your agreement. Arrange diagnosis.

11

Sources

12

Questions about this code

What does OP mean on a Viking refrigerator?

The manual describes the indication as “open thermistor during service testing”. Match the model and control version before following the instructions.

What should I do before requesting refrigerator service?

Record whether the equipment door closes when preparing for appliance inspection. Keep any displayed alarm wording with your operating notes. Leave the enclosed control circuits alone when preparing for inspection.

14

Refrigerator models on file

All models

15

Work order

Book a Viking technician

Read the model and serial number off the rating plate and add them to the request — the technician checks parts for that exact unit before the visit.

Request a Viking repair

Ready to get your Viking appliance working again?

Diagnosis first, a written estimate before any work, parts matched to the full model number.

(415) 853-4850 Book a Repair