Viking Refrigerator error code
Viking Refrigerator OPEN DOOR ALARM Error Code
What OPEN DOOR ALARM means on a Viking refrigerator, the checks that are safe to make and when it needs a technician.
Display readoutDallas
OPEN DOOR ALARMRefrigerator display code
OPEN DOOR ALARM
What it means
OPEN DOOR ALARM is described as “open-door alarm”.
OPEN DOOR ALARM: open-door alarm.
Safe for owners
Check first
Switch the appliance off at the breaker for one minute, restore power and note whether the code returns. Nothing else should be opened or removed.
Likely cause
On most Viking appliances, OPEN DOOR ALARM points to a control, sensor, ignition, heating, door-lock, water or drain issue that should be confirmed against the full model number before parts are replaced.
When to book
If the code comes back after the power reset, or there is water, a burning smell or a tripped breaker, stop using the appliance and book a visit with the full model number.
About OPEN DOOR ALARM
On a Viking refrigerator, the OPEN DOOR ALARM indication has this documented meaning: “open-door alarm”.
| Code | OPEN DOOR ALARM |
|---|---|
| Meaning | Alarm sounds when a door or drawer stays open longer than 3 minutes. |
| Applies to | 7 Series built-in bottom-freezer (FBI7360/VBI7360); similar alarm in VCBB5363E |
Checks before the visit
The appliance manual includes these owner actions.
- Close the door, or press the ALARM button.
The signal during operation
The matching manual gives the indications below.
- In the VCBB5363E manual the open door alarm sounds and the DOOR OPEN light blinks if a door is left open for more than three minutes.
- The ALARM button light blinks while the open door alarm sounds.
Reset instructions from the manual
The documentation sets out these clearing instructions.
- Closing the door turns the open door alarm off.
Other signals to look up
- Shr — Temperature sensor alarm: display shows Shr (sensor problem) with audible alarm.
- LONG TERM POWER LOSS — After a long power loss the display shows a power-loss indication.
- HIGH TEMPERATURE ALARM — Alarm sounds and display flashes when temperature exceeds the allowed high temperature.
Safe checks and useful observations
Document a door-related alarm during the initial service discussion. Make a note of whether a door alarm is also active. Leave all internal wiring connections alone when preparing for inspection.
Preparing for a Dallas visit
At booking, provide the unit identification and symptom notes and describe any changes while the appliance runs. Assessment precedes decisions on proposed work; the suggested work comes with a written estimate, and repairs require your approval. Book an assessment.
Sources
Questions about this code
What does OPEN DOOR ALARM mean on a Viking refrigerator?
The manual describes the indication as “open-door alarm”. Match the model and control version before following the instructions.
What should I do before requesting refrigerator service?
Tell the service professional about when the door alarm stops as part of the operating concern description. Give details of any alarm that accompanies the door problem. Leave the hidden electrical connections intact for the service professional.
Refrigerator models on file
- FBI7360W36-inch integrated panel-ready bottom-freezer refrigerator7 Series Integrated 36-inch Bottom-Freezer.
- FBI7360WR36-inch integrated panel-ready bottom-freezer refrigerator7 Series Integrated 36-inch Bottom-Freezer.
- FBUI5242D24-inch panel-ready solid-door undercounter beverage center24-inch Panel Ready Solid Door Beverage Center.
- FDBB536436-inch built-in panel-ready bottom-freezer refrigerator36-inch Built-in Bottom-Freezer.
Work order
Book a Viking technician
Read the model and serial number off the rating plate and add them to the request — the technician checks parts for that exact unit before the visit.
- Phone(415) 853-4850
- Emailservice
@vikingdallas .com - HoursMon–Sat 8:00 AM – 7:00 PM
- Service area11 counties across Dallas–Fort Worth
Request a Viking repair
Ready to get your Viking appliance working again?
Diagnosis first, a written estimate before any work, parts matched to the full model number.