Skip to content

Viking Wall oven error code

Viking Wall Oven F21 Error Code

What F21 means on a Viking wall oven, the checks that are safe to make and when it needs a technician.

Display readoutDallas

F21Wall oven display code

01

F21

What it means

F21 is described as “shorted key”.

F21: shorted key.

02

Safe for owners

Check first

Switch the appliance off at the breaker for one minute, restore power and note whether the code returns. Nothing else should be opened or removed.

03

Likely cause

On most Viking appliances, F21 points to a control, sensor, ignition, heating, door-lock, water or drain issue that should be confirmed against the full model number before parts are replaced.

04

When to book

If the code comes back after the power reset, or there is water, a burning smell or a tripped breaker, stop using the appliance and book a visit with the full model number.

05

About F21

The F21 indication on a Viking wall oven is described in the manual as “shorted key”.

Applies toOvens with TOD2 clock display
CodeF21
MeaningShorted key: TOD2 detects one or more keys shorted for over 1 minute; cancels timed cycle or delay start.
06

Technical fault guidance

The service guidance provides these diagnostic checks.

  • Replace the TOD2 or fix the issue.
07

Check a different display code

  • F4 — Shorted oven sensor or sensor circuit.
  • F2 — Oven over temperature: check sensor wiring, sensor and temperature limiter.
  • F1 — Control malfunction (electronic range control, ERC); source says replace the ERC.
08

Safe preparation for diagnosis

Report which heating functions are affected with the model identification. Keep the selected cooking function with your account of the problem. Leave the appliance service panels alone when preparing for inspection.

09

Preparing for a Dallas visit

Have ready the appliance identification and symptom notes, plus the original display wording. Diagnosis comes first; a written repair estimate describes the proposal, so no repair begins before you authorize it. Request appliance service.

10

Sources

11

Questions about this code

What does F21 mean on a Viking wall oven?

The manual describes the indication as “shorted key”. Match the model and control version before following the instructions.

What should I do before requesting wall oven service?

Keep a record of the chosen heating mode as part of the symptom description. Keep a record of the cooking mode that was selected. Keep the concealed appliance wiring untouched while checking external controls.

13

Wall oven models on file

All models

14

Work order

Book a Viking technician

Read the model and serial number off the rating plate and add them to the request — the technician checks parts for that exact unit before the visit.

Request a Viking repair

Ready to get your Viking appliance working again?

Diagnosis first, a written estimate before any work, parts matched to the full model number.

(415) 853-4850 Book a Repair